Add To Favorate Print This Page Email This Page

These breakout boxes are used as manual pin (K line) selection to access to various car control systems or used as parallel measurement diagnostic.

 

This 16 pins breakout box enables access to all pins on a 16 pin OBDII connector via 4mm female banana sockets. Some cars (examples of such cars are Opel or Mercedes Benz) use a lot of different K-lines for it's different systems like engine ECU, ABS, etc. and this is needed for most scantools if it needs to access all the systems by just plugging in the K-line into the right socket of the system.

 

 

This 14 pins breakout box enables access to all pins on a 14 pin Mercedes Benz Sprinter or Volkswagen LT connector via 4mm female banana sockets. This is needed for most scantools if it needs to access all the systems by just plugging-in the K-line into the right socket of the system.

 

 

This 38 pins breakout box enables access to all pins on a 38 pin Mercedes Benz diagnostic connector via 4mm female banana sockets. Since Mercedes Benz use a lot of different K-lines for it's different systems like engine ECU, ABS, etc. this is needed for most scantools if it needs to access all the systems by plugging in the K-line into the right socket of the system.

 

 

Cable length is 1.5 meters and the cable is interchangeable by a DB37 connector from the box.