EN | 简体 | 繁体 Loding...

HuaWenYi Technology
Home About Us Products Support Feedback Sitemap Contact Us Help

Home >> Auto Cleaning And Care Series >> CNC-601A Injector Cleaner & Tester

This is the details of "CNC-601A Injector Cleaner & Tester" Product Details

CNC-601A Injector Cleaner & Tester

Category : Auto Cleaning And Care Series

Product Photo

Add To Favorate

Print This Page

Email This Page

CNC-601A Injector Cleaner & Tester-Auto Cleaning And Care Series

Description

CNC-601A injector cleaner & tester developed with the technology of ultrasonic cleaning and fuel pressure control, CNC-601A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.

Packing: Paper box

Features:
Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.

Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.

Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.

Auto. test: To test injectors by simulating different working conditions.

On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.

Specifications:

Power supply:AC220V±10%/50Hz~60Hz AC110V±10%/ 50Hz~60 Hz
Input power: 250W;
Ultrasonic cleaning power: 100W;
Simulated RPM range: 10～9990rpm; step: 10rpm;
Count range: 1～9999 times;
Pulse width: 0.5～25ms; step 0.1 ms;
Fuel tank capacity: 4700ml;
Dimensions: 550mm×530mm×1400 mm;
Weight: About 80kg.

Spare Parts:
Adaptor 1 for fuel top-supply injector,Swiss thread adaptor for fuel top-supply injector,Coarse thread adaptor for fuel top-supply injector,Plug for BUICK injector,Hexangular Stopper,O - ring,CNC-Pulse connecting wire,connnecting hose for on-vehicle cleaning,Flush-back Adaptor for fuel top-supply injector,On-vehicle cleaning kit,Ultrasonic Cleaner.

Product Name : CNC-601A Injector Cleaner & Tester
Relation Link : http://www.cnreliable.com/Auto-Cleaning-And-Care-Series/Auto-Cleaning-And-Care-Series-00416A.html

More Products

[Auto Cleaning And Care Series] MRF-302 A/C Service Station

[Auto Cleaning And Care Series] MRF-301M A/C Service Station

[Auto Cleaning And Care Series] MRF-301 A/C Service Station

[Auto Cleaning And Care Series] Value-100 A/C Service Station

[Auto Cleaning And Care Series] CAT-402 Auto Transmission Fluid Changer

[Auto Cleaning And Care Series] CAT-401 Auto Transmission Fluid Changer

[Auto Cleaning And Care Series] CAT-303 Auto Transmission Fluid Changer

[Auto Cleaning And Care Series] CNC-801A Injector Cleaner & Tester

[Auto Cleaning And Care Series] CNC-601A Injector Cleaner & Tester

[Auto Cleaning And Care Series] CNC-402A